PRODUCT INFORMATION
| Model# | GISO14801XY |
|---|
TestResources GISO 14801 Dental Fatigue Test Fixture product line tests exactly to ISO 14801 in FDA guidelines. The GISO 14801XY Flexible Dental Fatigue Test Fixture is perfect for performing dynamic fatigue tests for endosseous dental implants. The fixture should be mounted on the exposed end of the implant to avoid lateral stresses.
GISO 14801XY provides mechanical flexibility such as an adjustable test sample angle with linear slides to allow the sample position to be adjusted in either X or Y dimension. These features are useful when performing research and development of new implants.
In ISO 14801, the test machine loads the sample with an indentor or flat punch fixture. The angle of inclination of the implant with respect to the load axis is 30 degrees. The implant is fastened at a specified (3 mm) distance from the apex from the level of the nominal bone or the treated surface of the implant. The implant holder and punch are made of stainless steel if testing in a Biobath saline bath. Otherwise the ISO 14801 standard specifies material requirements for the supplied fixtures. The implant is fastened to the holder base by a tightening plate.
For those seeking to test consistently at the specified 30 degree angle, take a look at TestResources GISO 14801 Dental Fatigue Test Fixture, featuring a fixed 30 degree angle with a hemispherical loading member featuring a radius of 2.5mm.
FEATURES & BENEFITS
- Tests in accordance with ISO 14801
- Features a radius of 2.5mm
- Has linear slides to allow the sample position to adjust in either X or Y dimension