Fiberglass is a plastic matrix composite material that is constructed from a resin and fine glass fibers. It is relatively inexpensive to produce fiberglass, and the end product is light weight, strong and can be applied to a variety of applications. In certain industries fiberglass is referred to as glass-reinforced plastics (GRP), or glass-fiber-reinforced plastic (GFRP). ASTM and ISO have standard test methods that are related to fiberglass materials, and fiberglass products. The standard test methods from ASTM and ISO are general plastic test procedure for determining tensile, bend, adhesion, compression, creep, fatigue, and dynamic properties of fiberglass. ASTM also has standards for testing fiberglass panels, and tubing. These fiberglass testing standards reference the mechanical testing standards for testing procedures. TestResources provides guidelines for ASTM, and ISO standard testing methods for tensile, bend, compression, adhesion, dynamic, fatigue and creep testing fiberglass. TestResources modular test equipment is configured by our applications engineers to match your specific material, sample type and test method. Our product line includes a wide variety of test machines, test software, grips, test fixtures, extensometers, sample preparation aids, and environmental chambers. Call us to discuss your test application. ASTM and ISO Standards for Strength and Mechanical Properties of Fiberglass The following is a list of mechanical test standards from ASTM and ISO that are used to determine tensile, bend, adhesion, compression, creep, fatigue, and dynamic properties of fiberglass. Fiberglass Strength Testing Machines and Equipment TestResources provides testing machines that are capable of performing mechanical testing on fiberglass materials. Fiberglass test machines from TestResources can be used to perform tensile, bend, compression, adhesion, dynamic, fatigue and creep testing. These material testing machines are modular, and can efficiently and effectively be custom built for each application. TestResources builds each fiberglass testing machine to meet the needs of the customer to ensure the highest degree of quality.
Applicable Testing Standards
- ISO 178 3 Point Bend of Plastics | Flexural Test Machines & Equipment
- ISO 527 - Tensile Test of Plastics Composites
- ISO 6721 Dynamic Testing of Plastic Materials
- ISO 13003 Fibre Reinforced Plastics Fatigue Test Machine
- ISO 14125 Plastic Composites Flexure Bend Test Machine
- ASTM D638 Tension Testing for Plastics
- ASTM D695 Compression Testing for Rigid Plastics
- ASTM D747 Bend Testing of Plastics by Means of a Cantilever Beam
- ASTM D790 Testing for Flexural Properties of Plastics and Insulating Materials
- ASTM D2290 Plastic or Reinforced Plastic Pipe Tensile Testing Equipment
- ASTM D5024 Compression Dynamic Plastics Composites Test Machine
- ASTM D5026 Tension Dynamic Plastics Composites Test Equipment
- ASTM D5279 Thermoset & Thermoplastic Dynamic Torsion Testing Machine
- ASTM D5418 Plastics Dynamic Flexure Test Machine
- ASTM D6272 Four Point Flexural Bend Test Machine for Plastics and Insulating Materials
Recommended Test Machine
Forces up to 10 kN (2,250 lbf)
Low force tabletop systems
Modular series of five frame options with adjustable test space
Affordable testing option for tension, compression, bend, peel and much more
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Load ratings up to 250 kN (56,250 lbf)
Base lengths up to 1200 mm (48 in)
Various roller sizes available
Available in 3-point and 4-point configurations
Rated to 25 kN (5,625 lbf)
Available in 3-point and 4-point configurations
Load ratings from 10 kN to 100 kN (2,250 lbf to 22,500 lbf)
Maximum specimen thicknesses from 16 mm to 22 mm (0.63 in. to 0.87 in.)
Pneumatic actuation eases specimen setup
Self-tightening design
Load ratings up to 10 kN (2,250 lbf)
Interchangeable roller diameters from 1 mm to 12.7 mm (0.04 in to 0.5 in)
Easily adjustable span
Base lengths of 150 mm (6 in) and 300 mm (12 in)
Rated to 5 kN (1,125 lbf)
Works well with flat or round specimens
Maximum specimen thickness / diameter of 10 mm (0.4 in)
Load ratings up to 500 kN (112,500 lbf)
Adjustable span with built-in ruler for accurate spacing
Available in 3-point and 4-point configurations
Load ratings of 2.5 kN and 10 kN (550 lbf and 2,250 lbf)
Span and roller dimensions made to order
Satisfies ASTM D790 and D7264
Loading nose is guided by linear bearing for high precision
Satisfies the requirements of ASTM D638
Load ratings of 20 kN and 50 kN (4,500 lbf and 11,250 lbf)
Maximum specimen thickness of 16 mm (0.63 in)
Self-tightening design resists slippage of the specimen
Satisfies the requirements of ASTM D2105
Designed to test pipes and tubing in tension
Dimensions made to order per specimen dimensions
Self-tightening design resists specimen slippage
Standard temperature range of -155°C to 620°C (-247°F to 1150°F)
Accompanied by a broad set of accessories that are capable of withstanding the heat or cold
PID controlled internal temperature
Mounts directly to the test frame