ASTM D4987 covers the procedure for testing the tensile breaking strength of the perforations in one-part continuous forms. Minimum tensile strength of the perforation is important to assure that the form will not prematurely break apart during the printing, converting, and forms handling operation.
By means of our testing expertise and modular product design, we will help find the solution that is right for you. Give our test engineers a call today for help configuring the best test machine and accessories according to your standard.
Recommended Test Machine
Forces up to 10 kN (2,250 lbf)
Low force tabletop systems
Modular series of five frame options with adjustable test space
Affordable testing option for tension, compression, bend, peel and much more
Forces up to 5 kN (1,125 lbf)
Low force tabletop systems
Tests at speeds up to 2,500 mm/min (100 in/min)
Best for high travel or high elongation test requirements
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Rated to 1 kN (225 lbf)
Maximum specimen thicknesses from 10 mm to 50 mm (0.39 in. to 2.0 in.)
Simple design can be used for a multitude of tensile applications
Inexpensive and reliable
Rated to 0.6 kN (135 lbf)
Maximum specimen thicknesses from 8 mm to 50 mm (0.3 in. to 2.0 in.)
Clamp force up to 1.2 kN (270 lbf)
Quick and simple specimen setup for a wide variety of applications
Rated to 500 N (112 lbf)
Maximum specimen thickness of 6 mm (0.23 in)
Pneumatic design allows for quick specimen setup
Consistent clamping force between tests
Standard sample widths of 0.50 in. and 1.00 in.
Other sample widths available upon request
Effective and simple to use
Blade replacement takes mere seconds
