ASTM D5083 covers the determination of the tensile properties of thermosetting reinforced plastics using test specimens of uniform nominal width. ASTM D5083 produces tensile property data for quality control and research and development. Factors that influence the tensile properties, and should therefore be reported, are: material, methods of material and specimen preparation, specimen conditioning, test environment, speed of testing, void content, and volume percent reinforcement.
By means of our testing expertise and modular product design, we will help find the solution that is right for you. Give our test engineers a call today for help configuring the best test machine and accessories according to your standard.
Recommended Test Machine
Forces up to 10 kN (2,250 lbf)
Low force tabletop systems
Modular series of five frame options with adjustable test space
Affordable testing option for tension, compression, bend, peel and much more
Forces up to 5 kN (1,125 lbf)
Low force tabletop systems
Tests at speeds up to 2,500 mm/min (100 in/min)
Best for high travel or high elongation test requirements
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Rated to 10 kN (2,250 lbf)
For testing adhesives or films at a 90° angle
Rolling table maintains the peel angle throughout the test
Standard length of 300 mm (11.8 in) - other lengths available
Load ratings from 10 kN to 100 kN (2,250 lbf to 22,500 lbf)
Maximum specimen thicknesses from 16 mm to 22 mm (0.63 in. to 0.87 in.)
Pneumatic actuation eases specimen setup
Self-tightening design
Load ratings up to 10 kN (2,250 lbf)
Interchangeable roller diameters from 1 mm to 12.7 mm (0.04 in to 0.5 in)
Easily adjustable span
Base lengths of 150 mm (6 in) and 300 mm (12 in)
Rated to 5 kN (1,125 lbf)
Works well with flat or round specimens
Maximum specimen thickness / diameter of 10 mm (0.4 in)
Measures displacement for axial tensile, compression, and cyclic testing
Gage lengths from 10 mm to 50 mm (0.5 in to 2.0 in)
Measuring ranges from 5% to 100% strain
Lightweight and self-supporting
Gage lengths from 50 mm (2.0 in) to 250 mm (10 in)
Measuring ranges up to 100 mm (4.0 in)
Standard temperature range of -155°C to 620°C (-247°F to 1150°F)
Accompanied by a broad set of accessories that are capable of withstanding the heat or cold
PID controlled internal temperature
Mounts directly to the test frame
Stamps test specimens from soft rubber, leather, or similar stock materials
Consistant samples for consistant results
Force outputs of 900 kgf or 3,000 kgf (1 ton or 3 ton)
No need to press by hand
