ASTM D5733 covers the measurement of the tearing strength of nonwoven fabrics by the trapezoid procedure using a constant-rate-of-extension (CRE) tensile testing machine. ASTM D5733 is used in the trade for acceptance testing of commercial shipments of nonwoven fabrics, however, caution is advised since information about between laboratory precision is incomplete.
By means of our fabric testing expertise and modular product design, we will help find the solution that is right for you. Give our test engineers a call today for help configuring the best test machine and accessories according to ASTM D5733.
Recommended Test Machine
Forces up to 10 kN (2,250 lbf)
Low force tabletop systems
Modular series of five frame options with adjustable test space
Affordable testing option for tension, compression, bend, peel and much more
Forces up to 5 kN (1,125 lbf)
Low force tabletop systems
Tests at speeds up to 2,500 mm/min (100 in/min)
Best for high travel or high elongation test requirements
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Rated to 3.5 kN (790 lbf)
Clamping force up to 7.0 kN (1,600 lbf)
Consistent clamp force between tests
Quick and easy specimen setup for a wide variety of applications
Rated to 8 kN (1,800 lbf)
Clamping force up to 16 kN (3,600 lbf)
Maximum specimen thicknesses from 10 mm to 30 mm (0.39 in. to 1.2 in.)
Pneumatic actuation allows for quick and simple specimen setup
Rated to 1 kN (225 lbf)
Maximum specimen thicknesses from 10 mm to 50 mm (0.39 in. to 2.0 in.)
Simple design can be used for a multitude of tensile applications
Inexpensive and reliable
Rated to 0.6 kN (135 lbf)
Maximum specimen thicknesses from 8 mm to 50 mm (0.3 in. to 2.0 in.)
Clamp force up to 1.2 kN (270 lbf)
Quick and simple specimen setup for a wide variety of applications
