Specifies methods for determining characteristics for adhesives used in the installation of ceramic tiles.
ISO 13007-2 Test Methods for Ceramic Tile Grouts and Adhesives
ISO 13007-2:2010 describes methods for determining characteristics for adhesives used in the installation of ceramic tiles. The test methods described are determination of open time, determination of slip, determination of shear adhesion strength, determination of tensile adhesion strength, determination of transverse deformation and determination of chemical resistance.
ISO 13007-4 Test Methods for Grouts used for Ceramic Tiles
ISO 13007-4 describes methods for determining characteristics of grouts used in the installation of ceramic tiles. The test methods described are determination of flexural and compressive strength, determination of water absorption, determination of shrinkage, determination of resistance to abrasion, determination of transverse deformation and determination of chemical resistance.
For ISO 13007-2, you will need a tension testing machine and Compression testing machine. Test machine, for direct pull tensile force test and with suitable capacity and sensitivity for the test. The machine shall be capable of applying the load to the pull-head plate at the rate of (250 +- 50) N/s through suitable fitting that does not exert any bending force.
For ISO 13007-4, a universal compression testing machine is required, capable of applying the load with suitable capacity and sensitivity for the test. The machine shall be provided with a flexure device. The machine shall be capable of smoothly applying a load at the rate of (2400 +- 200) N/s.
By means of our testing expertise and modular product design, we will help find the solution that is right for you. Give our test engineers a call today for help configuring the best test machine and accessories according to ISO 13007.
Recommended Test Machine
Forces up to 10 kN (2,250 lbf)
Low force tabletop systems
Modular series of five frame options with adjustable test space
Affordable testing option for tension, compression, bend, peel and much more
Forces up to 5 kN (1,125 lbf)
Low force tabletop systems
Tests at speeds up to 2,500 mm/min (100 in/min)
Best for high travel or high elongation test requirements
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Standard load ratings up to 300 kN (67,500 lbf) *higher ratings available upon request
Platen diameters from 56 mm to 346 mm (2.2 in to 13.6 in)
Available in steel, stainless steel, aluminum, or delrin construction
Machined surface for flat interface with test specimen
