ISO 13954 describes a peel test method for determining the decohesive resistance of polyethylene electrofusion socket assemblies for use in the distribution of fluids. This method is applicable to assemblies with nominal outside diameters greater than or equal to 90 mm.
Tensile-testing machine, capable of pulling at a speed of 20 mm/min to 50 mm/min with sufficient force to separate the test piece components. By means of our testing expertise and modular product design, we will help find the solution that is right for you. Give our test engineers a call today for help configuring the best test machine and accessories according to ISO 13954.
Recommended Test Machine
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Rated from -40°C to 150°C (-40°F to 300°F)
Clevis design
Maximum specimen widths from 12.7 mm to 50.8 mm (0.50 in. to 2.00 in>)
Pin diameters from 12.7 mm to 50.8 mm (0.50 in. to 2.00 in.)
Rated to 8 kN (1,800 lbf)
Clamping force up to 16 kN (3,600 lbf)
Maximum specimen thicknesses from 10 mm to 30 mm (0.39 in. to 1.2 in.)
Pneumatic actuation allows for quick and simple specimen setup
