ISO 36:2011 specifies a test method for measuring the force required to separate or strip two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together. The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be excluded when cutting out test pieces.
Equipment Required
By means of our testing expertise and modular product design, we will help find the solution that is right for you. Give our test engineers a call today for help configuring the best test machine and accessories according to your standard.
Recommended Test Machine
Forces up to 10 kN (2,250 lbf)
Low force tabletop systems
Modular series of five frame options with adjustable test space
Affordable testing option for tension, compression, bend, peel and much more
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Rated to 100 N (22 lbf)
Maximum specimen thickness of 18 mm (0.71 in)
Pneumatic design allows for quick specimen setup
Consistent clamping force between tests
Rated to 220 N (50 lbf)
Maximum specimen thickness of 8 mm (0.31 in)
Wider model allows for specimens thicknesses up to 46 mm (1.8 in)
Cost effective option for low force testing
