ISO 4385 serves for the determination of the behavior of metallic materials under uniaxial compression loading which is uniformly distributed over the cross-section. For this purpose, a cylindrical specimen is subjected to compression which is slowly and continuously increased, and the compressive force used is measured.
Equipment Required
Compression testing machine capable of continuously increasing a load in compression with an increase in stress of a maximum of 30 N/(mm*mm*s). By means of our testing expertise and modular product design, we will help find the solution that is right for you. Give our test engineers a call today for help configuring the best test machine and accessories according to your standard.
Recommended Test Machine
Forces up to 10 kN (2,250 lbf)
Low force tabletop systems
Modular series of five frame options with adjustable test space
Affordable testing option for tension, compression, bend, peel and much more
Forces up to 5 kN (1,125 lbf)
Low force tabletop systems
Tests at speeds up to 2,500 mm/min (100 in/min)
Best for high travel or high elongation test requirements
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Standard load ratings up to 300 kN (67,500 lbf) *higher ratings available upon request
Platen diameters from 56 mm to 346 mm (2.2 in to 13.6 in)
Available in steel, stainless steel, aluminum, or delrin construction
Machined surface for flat interface with test specimen
Standard load ratings up to 300 kN (67,500 lbf) *higher ratings available upon request
Platen diameters available from 56 mm to 196 mm (2.2 in to 7.7 in)
Articulating platen aligns itself to specimen geometry
Available in steel or aluminum construction
