The test method described in ISO 36 is used for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber or a rubber layer and a fabric ply bonded together. This test is used for the determination of median peak force and the adhesion strength characteristics of the product for a given rate of displacement.
Applicable Testing Standards
Recommended Test Machine
Forces up to 10 kN (2,250 lbf)
Low force tabletop systems
Modular series of five frame options with adjustable test space
Affordable testing option for tension, compression, bend, peel and much more
Forces up to 5 kN (1,125 lbf)
Low force tabletop systems
Tests at speeds up to 2,500 mm/min (100 in/min)
Best for high travel or high elongation test requirements
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Rated to 220 N (50 lbf)
Maximum specimen thickness of 8 mm (0.31 in)
Wider model allows for specimens thicknesses up to 46 mm (1.8 in)
Cost effective option for low force testing
Rated to 500 N (112 lbf)
Maximum specimen thickness of 6 mm (0.23 in)
Pneumatic design allows for quick specimen setup
Consistant clamping force between tests
Rated to 100 N (22 lbf)
Maximum specimen thickness of 18 mm (0.71 in)
Pneumatic design allows for quick specimen setup
Consistant clamping force between tests
