Testing rubber adhesion to metal requires the use of application specific sample types and forms. ASTM D429 features 7 different specimens, applications and methods, including Two Parallel Metal Plates, 90 degree peel stripping test sample, use of a conical specimen, and Post-Vulcanization (PV) Bonding of Rubber to Metal. The test equipment requirements follow the specific test method of interest.
Applicable Testing Standards
Recommended Test Machine
Forces up to 5 kN (1,125 lbf)
Low force tabletop systems
Tests at speeds up to 2,500 mm/min (100 in/min)
Best for high travel or high elongation test requirements
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Rated to 10 kN (2,250 lbf)
For testing adhesives or films at a 90° angle
Rolling table maintains the peel angle throughout the test
Standard length of 300 mm (11.8 in) - other lengths available
Load ratings from 1 kN to 10 kN (225 lbf to 2,250 lbf)
Maximum specimen thicknesses of 7 mm or 8 mm (0.28 in. or 0.31 in.)
Works very well with flat, thin specimens
Eccentric design increases gripping force with tension
