The single lap shear test is very common test of the strength of adhesive bonds involving metals. There are several standard test methods and the test is considered inexpensive and easy to perform.
Applicable Testing Standards
- ASTM D1002 Lap Shear Testing for Adhesively Bonded Metals
- ASTM D2295 Shear Adhesives Testing Equipment
- ASTM D2557 Shear Adhesives Testing Equipment
- ASTM D3163 Lap Shear Rigid Plastic Test Equipment
- ASTM D3164 Lap-Shear Sandwich Testing Machine
Recommended Test Machine
Forces up to 10 kN (2,250 lbf)
Low force tabletop systems
Modular series of five frame options with adjustable test space
Affordable testing option for tension, compression, bend, peel and much more
Forces up to 5 kN (1,125 lbf)
Low force tabletop systems
Tests at speeds up to 2,500 mm/min (100 in/min)
Best for high travel or high elongation test requirements
Force range of 5 kN to 600 kN (1,125 lbf to 135,000 lbf)
Adjustable test space
The most popular choice for static tension and compression tests
These dual column testers are available in both tabletop and floor standing models
Recommended Testing Accessories
Rated to 50 kN (11,250 lbf)
Maximum specimen thickness of 30 mm (1.2 in)
Affordable option for a wide variety of applications
Can accommodate various jaw types
Load ratings of 10 kN or 20 KN (2,250 lbf or 4,500 lbf)
Maximum specimen thickness of 30 mm (1.2 in)
Simple yet strong design can be used for a multitude of tensile applications
May be used for flat or round specimens
Load ratings of 20 kN and 50 kN (4,500 lbf and 11,250 lbf)
Maximum specimen thickness of 16 mm (0.63 in)
Self-tightening design resists slippage of the specimen
Fast and easy specimen setup